Hitachi PSC-A32MN - Page 80

5.4.4.4 External Input setting
1 Select “External Input/Output setting” on the Service Menu screen.
Selection is not possible when air conditioners are in operation, or when the contact for external input signal is ON.
 
(1)
2 Select the input target (From input 1 to 4) of the external input.
 
(2)
3 Select the function to be used with the external input.
 The button for the selected function is highlighted in yellow. After selecting a function, proceed to the following point in the
process as indicated below:
 If “No Settings” is selected, go to section
³1R6HWWLQJV´.
 If “Outdoor unit capacity control” is selected, go to section
³2XWGRRUXQLWFDSDFLW\FRQWURO´.
 If any other function is selected, go to section
´2WKHUVHWWLQJV´.
(3)
No Settings
4 Tap “Service Menu” to complete External Input/Output setting and return to the Service Menu screen.
 
(4)
Operation
PMML0332A rev.0 - 05/201572