Operation procedure
• Remote control operation procedure
Note: This is a general use remote control, it could be used for the air conditioners with
multifunction. For some functions which the model doesn’t have, the unit will keep the
original running status if pressing the corresponding button on the remote control.
1 On / Off button
Press this button to turn on the unit. Press this button again to turn off the unit.
2 Mode button
Press this button to select your required operation mode. Corresponding indicator will
be on.
Auto Cool Dry Fan Only Heat (Not applicable)
● Auto: Under this mode, the unit will operate automatically according to default setting.
In this case, set temperature cannot be adjusted.
● Cool: Under this mode, air conditioner operates under cooling mode. Cooling indicator
will be on. Press “Fan” button to adjust the fan speed.
To Next Page
Loading...
