1 ON/OFF BUTTON
Operation starts when pressing this button. Pressing this button again to
stop the operation.
2 SWING BUTTON
Activate the automatic air swing function.
3 FAN SPEED BUTTON
Select the fan speed LOW, MID, HIGH and AUTO in sequence.
4 TIME/TEMP BUTTON
Press the keypad to increase the set (operating) temperature of the unit.
Press the keypad to decrease the set (operating) temperature of the unit.
The temperature setting range is from 16~30°C.
For the time setting range from 0~10 hours, press the keypad to increase the
selected time on 0.5 hour increment, and press the keypad to decrease the
selected time in 0.5 hour decrement.
For the time setting range from 10~24 hours, press the keypad to increase the
selected time on 1 hour increment, and press the keypad to decrease the selected
time in 1 hour decrement.
5 SIGNAL RECEIVER
6 MODE BUTTON
Select the operation mode COOL, DRY, FAN (for cooling only model).
7 FILTER BUTTON
This feature is a reminder to clean the Air Filter (See Care and Cleaning) for
more efficient operation and cooling. The LED (Light) will illuminate after 250
hours of operation. To reset after cleaning the filter, press the "Filter" button
and the light will go off. Before the LED (Light) illuminate, press the “Filter" button
for 3 seconds to clear the accumulated time of operation.
To Next Page
Loading...
