Hitachi RAC-25WXEN - Operation and Maintenance Procedures; Sheathed Heater Operation

Before setting the switch, make sure to turn OFF
power supply and then set the position of the switch
otherwise will cause damage to the Main PCB.
-16.1℃
-0.1℃
HI
HI
LO
LO
SWITCH POSITION
OPEN THE TEMPERATURE
NOTE:
2.See page 17 for a detailed description of the
1.Factory default setting is at LO.
sheathed heater.
SHEATHED HEATER TO SELECT
SWITCH LO OR HI
!
CAUTION
SHEATHED HEATER
MODEL RAC-25/35/50WXEN
16