– 49 –
51
59
Combination of operations:
When operation mode is selected:
You cannot operate the indoor units in the following combinations.
The indoor unit which is switched on first continues to operate, but
other indoor units which is switched on later, does not operate while
the lamp lights.
During automatic operation:
When heating operation is automatically selected for the first indoor unit, the next
indoor unit will then start to heat. Also, if cooling or dehumidifying is automatically
selected for the first indoor unit, the next indoor unit will also start to cool or
dehumidify.
One unit
Heating
Other unit
Cooling
Dehumidifying
Circulating (fan)
Notes:
1. Refer to the PWRITE-ZU data for the constants expressed by capital alphabet letters in
the drawing.
2. The speed set of rotation for the fan motor in each operation mode are as shown in Table 1.
3. The set room temperatures in the diagram include the shift values in Table 2.
To Next Page
Loading...
