Q5
The micro-mesh and stainless steel
filter remain dirty.
·There may occur cleaning unevenness depending on
the operating environment. In that case, clean the
micro-mesh and stainless steel filter.
· If you wish to conduct "manual filter cleaning" at a
desired time while filter cleaning is disabled, then dirt
may remain depending on the amount of dust or dirt.
A5
The cleaning unit has stopped midway.
Q4
·Are the micro-mesh, stainless steel filter, dust catcher,
and filter cleaning wiper, and wiper cover correctly
installed?
(The "clean lamp" will go on for 4 seconds and off for 1
second.)
A4
To Next Page
Loading...
