OUTDOOR UNIT
1. Electrical parts
(1)Remove the service value cover lock screws
and lower the cover to remove it.
(2)Remove the top cover lock screw and raise the
cover to remove it.
Fig. 3
MODEL RAC-50WSE
(1)Remove the service value cover lock screws
and lower the cover to remove it.
(2)Remove the top cover lock screw and raise the
cover to remove it.
Fig. 1
OUTDOOR UNIT
MODEL RAC-25/ 35WSE
1. Electrical parts
Procedure for Disassembly and Reassembly
Fig. 2
(3)Remove the electrical box lock screw.
(4)Remove the terminal cover lock screw.
(5)Remove each connector and earth cable from
. xob lacirtcele eht evomer,nehT
.eriw dael eht
(3)Remove the front cover lock screw.
(4)Lower the right side of the front cover and pull
it forward. Then, remove the cover from the
hook.
(5)Pull the right side of the front
cover a little and
pull up the left side to remove it from the hook.
Fig. 4
(6)Remove each connector and earth cable from
the lead wire. Then,remove the electrical box .
To Next Page
Loading...
