– 11 –
ENGLISH
CLEAN (ONE TOUCH CLEAN) OPERATION
● Drying indoor heat exchanger after cooling operation to prevent mildew.
● Press the (MODE) button to display “ ” (CLEAN)
during OFF mode.
Press the (START/STOP) button.
ONE TOUCH CLEAN operation starts with a beep.
● When the ONE TOUCH CLEAN operation completes,
unit will switch OFF automatically.
● Total time taken for ONE TOUCH CLEAN operation is
60 minutes.
● During this operation, HEATING/FAN operation will
operate.
● During ONE TOUCH CLEAN, operation lamp and clean
lamp light up.
“ ” and “ ” are displayed on the LCD.
Press the button again to stop the operation.
Ion Mist
Wind Mode
NOTE
● Once if the weekly timer is set then there is no need to cancel it before operating ONE TOUCH CLEAN.
START
STOP
1
To Next Page
Loading...
