– 5 –
ENGLISH
MODE SELECTOR
AUTO
HEAT
DEHUMIDIFY
COOL
FAN
FAN SPEED
AUTO
SILENT
LOW
MED
HIGH
START / STOP
ECO SENSOR
FAN
POWERFUL
Precautions for Use
●
Do not put the remote controller in the following places.
●
Under direct sunlight.
●
In the vicinity of a heater.
●
Handle the remote controller carefully. Do not drop it on the floor, and protect it from water.
●
Once the outdoor unit stops, it will not restart for about 3 minutes (unless you turn the power switch
off and on or unplug the power cord and plug it in again).
This is to protect the device and does not indicate a failure.
●
If you press the MODE selector button during operation, the device may stop for about 3 minutes for
protection.
POWERFUL Button
Use this button to set the
POWERFUL mode. (
p. 18)
INFORMATION Button
(
p. 30)
ION MIST Button
(
p. 17)
ON / OFF TIMER setting Buttons
( p. 21)
WEEKLY TIMER setting Buttons
( p. 24)
MODE selector Button
Use this button to select the
operating mode. Every time you
press this button, the mode will
change from (AUTO) ➞
(HEAT) ➞ (DEHUMIDIFY) ➞
(COOL) ➞ (FAN) ➞
(ONE TOUCH CLEAN) and ➞
(FILTER CLEAN) cyclically.
(ONE TOUCH CLEAN) and
(FILTER CLEAN) can be
selected when the unit is OFF.
SILENT Button
Use this button to set the SILENT
mode. ( p. 19)
AUTO SWING (Vertical) Button
Controls the angle of the
horizontal air deflector. (
p. 14)
WIND MODE Button
Use this button to select the
operating mode. Every time you
press the button, the mode will
change from (AUTO SWING)
➞ CANCEL ➞
(DIRECT
AIRFLOW) ➞ (INDIRECT
AIRFLOW) ➞ CANCEL cyclically.
( p. 14)
LEAVE HOME Button
( p. 20)
NAMES AND FUNCTIONS OF REMOTE CONTROLLER
ECO SLEEP TIMER Button
Use this button to set the ECO
sleep timer. ( p. 22)
SILENT
INFO
SLEEP TIMER
AUTO SWING (VERTICAL)
AUTO SWING (HORIZONTAL)
LEAVE HOME
CLEAN
FILTER CLEAN
ION MIST
DIRECT AIRFLOW
INDIRECT AIRFLOW
DAY
PROGRAM NO.
ON / OFF TIMER
TIME
OK
DELETE
COPY / PASTE
CANCEL
SEND
CLOCK
To Next Page
Loading...
