The temperature setting field on the
remote control unit displays
+
℃
or -
℃
.
I tried in vain to change the setting during
dehumidification and comfortable cooling
by using the "humidity" button on the
remote control unit.
Q9
The remote control unit will give no
display in response to a push of the
"vertical vane" button.
Pressing the "comfortable cooling"
button during cooling started the
product at a temperature setting of 25
℃
when the external temperature was
33
℃
. Is there perhaps a difference
too large between it and the external
temperature?
The temperature will basically be set with the difference
from the external temperature controlled to 5
℃
. When
cooing is performed before comfortable cooling, or in any
other case where the room temperature is too low, the
room temperature may be set to its setting with 24
℃
as
the lower limit. If the temperature setting feels too low,
change it to a desired temperature by using the room
temperature button.
The remote control unit displays nothing.
The product will give a display when you operate the product
in "auto" or "quick laundry" in "quick dehumidification" by
using the operation switch button. This can be controlled
within the range of±3
℃
.
The product will display +
℃
if the temperature is
℃
higher than the room temperature in automatic setting.
The product will display -
℃
if the temperature is
℃
lower
than the room temperature in automatic setting.
You cannot set "quick dehumidification" to "quick laundry"
or "dew control" mode.
A9
A10
A11
A12
Q12
Q11
Q10
– 105 –
To Next Page
Loading...
