ĄThe default setting is AUTO.
DžAdjustment Range of Dehumidifying Operation
Room Temperature
Room Temperature
Humidity
Humidity
Automatically adjusted in the
range of
50% to 60%
Auto-controlled
temperature
±3°C
Auto-controlled
temperature
±3°C
Auto dry cool
operation
Manual dry cool
operation
DžAdjustment Range of Dry Cool Operation
Setting Range of AUTO/MANUAL Operation
•
Switches to the manual mode if the machine is working in the auto
dehu
midifying/dry cool operation.
•
Switches to the auto mode if the machine is working in the manual
dehu
midifying/dry cool operation.
Press the AUTO/MANUAL button.
Example: Dehumidifying
Indicates
MANUAL
40％～70％
40％～70％
40％～70％
SWITCHING BETWEEN AUTO/MANUAL DEHUMIDIFYING/DRY COOL OPERATION
The AUTO/MANUAL button allows you to set the temperature and humidity manually during
dehumidifying/
dry cool operation.
Auto dehumidifying
operation
Manual dehumidifying
operation
10°C~32°C
16°C~32°C
– 17 –
ENGLISH
2012-2-21 14:51:43
噝Ion mist operation is the combined operation mode of the fan operation
and moisturizing operation.
噝If the Ion mist mode is set while the air conditiconer is in basic operation mode, the air purifying function by
the electric dust collector will operate together.
Press the (ION MIST) button.
噝Adjust the fan speed to your preference. “HI”, “MED”, “LOW”, “SILENT”
can be selected.
噝When only Ion mist operation is set,
and (ON TIMER) preset cannot be done.
(OFF TIMER)
Press the (STOP) button.
噝A short beep sounds and Ion mist
operation
stops.
STOP
Press the (ION MIST) button.
CANCEL
during
operation
POWERFUL OPERATION
噝
噝The airflow will be extended so that the air can reach even further during powerful operation.
(Extended Airflow)
Press the (POWERFUL PERATION) button during operation.
噝A short beep sounds and the preference (Powerful) operation starts.
( POWERFUL) indicator lit on the remote controller.)
CANCEL
Press the (POWERFUL PERATION) button again.
噝 POWERFUL) indicator turns off on the remote controller.
Operation mode In this situation
Operating mechanism
Heating
噝 When you want the room to be
a little warmer
噝 Set approximately 2°C higher than the preset
temperature. Powerful heating operation is
performed.
Cooling
噝 When you want a little cooler
air
噝 When you want the room to be
a little cooler
Auto Dehumidifying
噝 When you want to remove
humidity a little faster
噝 Laundry drying efficiency is enhanced.
噝 Condensation-control efficiency is enhanced.
Dehumidifying
噝 Set approximately 3°C lower than the preset
temperature. Powerful cooling operation is
performed.
噝 High speed dehumidifying operation is performed
aiming to achieve humidity of approximately 40%.
Condensation
Control
Quick Laundry
By pressing the (POWERFUL PERATION) button during auto, heating, dehumidifying, cooling or stainless
plasma air purifying operation, the air conditioner performs the “Powerful” operation.
ION MIST OPERATION
– 18 –
, the electric dust collector operation
,,,
To Next Page
Loading...
