Hitachi RAS-2-HVNP - Page 58

2. Unit Installation
44
SMGB0079 rev.0 - 01/2013
Specications of snow protection hood
Product name Air discharge hood Rear suction hood Left suction hood
Model ASG-NP335F ASG-NP335FS2 ASG-NP280B ASG-NP280BS2 ASG-NP280L
ASG-
NP280LS2
Quantity 2 per unit 1 per unit
Material
Bonderized steel
sheet
Iron
Stainless
(NSSC 180)
Bonderized steel
sheet
Iron
Stainless
(NSSC 180)
Bonderized steel
sheet
Iron
Stainless
(NSSC 180)
Color
Gray (1.0Y8.5/0.5
or approximation)
—
Gray (1.0Y8.5/0.5
or approximation)
—
Gray (1.0Y8.5/0.5
or approximation)
—
Weight 3 kg 14 kg 8 kg
Assembling Knockingdown parts (assembled at eld)
Components Hood For air discharge part x 1
For rear side air intake x 1
(Upper side x 1 lowe side x 1)
For left side air intake x 1
Fixing screw 4 (M5x12 tapping screw) 11 (M5x14 tapping screw) 8 (M5x12 tapping screw)
Fixing screw
(SUS)
6 (M5x14 tapping
screw)
6 (M5x14)
24 (M5x14 tapping
screw)
24 (M5x14)
12 (M5x12 tapping
screw)
12 (M5x14)
Installation manual
Installation restriction
Installation with “Guard net” “Wind guard”
or “Air ow guide” is not available
Installation with “Guard net” is not available
Safety wire rope for overturning preven-
tion (optional parts)
ASG-SW20A