Hitachi RAS-2-HVNP - Page 64

2. Unit Installation
50
SMGB0079 rev.0 - 01/2013
Specications of snow protection hood
Product name Air discharge hood Rear suction hood Left suction hood
Model ASG-NP335F ASG-NP335FS2 ASG-NP335B ASG-NP335BS2 ASG-NP335L
ASG-
NP335LS2
Quantity 2 per unit 1 per unit
Material
Bonderized steel
sheet
Iron
Stainless
(NSSC180)
Bonderized steel
sheet
Iron
Stainless
(NSSC180)
Bonderized steel
sheet
Iron
Stainless
(NSSC180)
Color
Gray (1.0Y8.5/0.5
or approximation)
—
Gray (1.0Y8.5/0.5
or approximation)
—
Gray (1.0Y8.5/0.5
or approximation)
—
Weight 3 kg 14 kg 8 kg
Assembling Knockingdown parts (assembled at eld)
Components Hood For air discherge part x 1
For rear side air intake x 1
(Upper side x 1 lowe side x 1)
For left side air intake x 1
Fixing screw 4x(M5x12 l tapping screw) 10x (M5x14 l tapping screw) 8x (M5x12 l tapping screw)
Fixing screw
(SUS)
6x (M5x12 l tap-
ping screw)
6x (M5x14 l)
24x (M5x14 l
tapping screw)
24x (M5x14l)
14x (M5x12 tap-
ping screw)
14x (M5x14)
Installation manual
Installation restriction
Installation with “Guard net” “Wind guard”
or “Air ow guide” is not available
Installation with “Guard net” is not available
Safety wire rope for overturning preven-
tion (optional parts)
ASG-SW20A