Hitachi RAS-(4-12)HRNM(2)(E) - Page 44

2 Unit Installation
34
SMGB0064 rev.0 - 08/2011
One ow guide installation
1 Air discharge grille
2 Air ow
3 Air ow guide
4 Outdoor unit
5 M5 xing screw x4 (Accessories)
4
1
3
2
5
Service space (In case of upward air discharge)
• In case of right and left sides air discharge enough space for
air discharge is required.
• The downward air discharge is also available. In such case
install the base under the unit to secure enough space for air
discharge.
• In case of serial units installation air discharge should be
upward.
1 Min. 200 mm
2 Outdoor unit
3 Air ow guide
4 Passage side
1
2
3
4

Wind guard
Specications
Model WSP-335A
Quantity 1per unit
1
1
2
2
3
1 Mounting dimension
2 Air ow
3 3 4xØ7
Material
Galvanized sheet metal +
baked painting
Color Gray (1.0Y8.5/0.5)
Weight 5.5 kg
Accessories
Fixing screw
x 4 [M5 (SUS) x 12]
Installation manual
Installation
restriction
“Guard net” “Air ow guide” or “Snow protection
hood” is not available to install with Wind guard