Press the FAN SPEED button and select the desired FAN SPEED
(the display indicates your choice).
Press the temperature control button to set to the desired
temperature.
Press the (CIRCULATION) button. Circulating operation starts
with a beep. Press the (STOP) button to stop operation.
Press the button so that the display indicates (CIRCULATE).
As the settings are stored in memory in the remote controller, you only
have to press the (CIRCULATION) button next time.
■
Circulation Function
•
During circulation operation, compressor will not be running and there is no cooling operation with only
indoor fan running.
•
When the setting temperature is higher than roomtemperature, indoor fan will stop running.
To Next Page
Loading...
Need help?
General
