– 9 –
ENGLISH
CIRCULATION OPERATION
Press the (CIRCULATION) button so that the display
indicates (CIRCULATE).
Circulating operation starts with a beep.
Press the FAN SPEED button and select the desired FAN
SPEED (the display indicates your choice).
Press the temperature control button to set to the desired
temperature.
■ As the settings are stored in memory in the remote controller,
you only have to press the
(CIRCULATION) button next time.
1
3
Press the button to stop operation.
STOP
2
■ Circulation Function
● During circulation operation, compressor does not run and there is no cooling operation with only indoor
fan running.
● When the setting temperature is higher than room temperature, indoor fan will stop running.
To Next Page
Loading...
Need help?
General
