Names and Functions of Remote Controller
This controls the operation function and timer setting of the room air conditioner. The range of control
is about 7 meters. lf indoor lighting is controlled electronically, the range of control may be shorter.
Backlight function
• Backlight is to see the LCD readings in the dark.
• On Pressing any key, the LCD panel lights up for a period of approx. 10 seconds. After approx. 10
seconds the light automatically switches off.
• The function is independent of all other functions of the air conditioner.
• The backlight color is white.
Precautions for Use
• Do not put the remote controller under direct sunlight and high temperature.
• Do not drop it on the floor, and protect it from water.
• If you press the any function button during operation, the air conditioner may stop for about 3
minutes for protection before you can start it again.
Signal Transmission
Off Mode Sign
Mode Selector Button
Use this button to select the
operation mode. Every time
you press this button the
mode will change from (Cool)
(Dry) (Fan) cyclically.
(
Page 5)
(
(
Page 10)
On Timer Button
Select the turn ON time.
Page 19)
Off Timer Button
Select the turn OFF time .
(
Page 19)
My Mode Button
(
Page 21)
Invalid Operation Sign
Shown at invalid setting or
operation
Transmission Sign
The transmission sign blinks
when a signal has been sent.
Fan Speed Button
Select the fan speed.
( Page 6)
On/Off Button
Press this button to start
operation.
Press it again to stop
operation.
( Page 5)
Powerful Button
( Page 4)
Silent Button
( Page 16)
Temperature Button
Room temperature setting.
Value will change quicker
when keep pressing.
( Page 5)
Reset Button
( Page 24)
Up/Down Button
Control the angle of the
horizontal air deflector.
( Page 17)
Left/Right Button
Control the angle of the
Vertical air deflector.
( Page 18)
SleepSense Button
(
Page 14)
FrostWash Button
(
Page 7)
Filter Sign Reset Button
(
Page 24)
Smart Eco Button
Use this button to set the
Eco mode.
To Next Page
Loading...
