Hitachi RCIM-1.0FSN2 - OPERATION PROCEDURE FOR COOLING, HEATING, DRY AND FAN OPERATIONS; SETTING THE TEMPERATURE, FAN SPEED AND AIR LOUVER DIRECTION

7
10
INSTALLATION OF OPTIONAL AIR PANEL: P-N23WAM
- It’s able to adjust the indoor unit height by using wrench
from the corner pocket.
- Too considerable adjustment of height cause dewing
from drain-pain.
- Do not turn the air louver by hand. If moved, the louver
mechanism would be damaged.
7.3. WIRING CONNECTION FOR AIR PANEL
1. The beside connector is used with the air
panel (view from lower surface of air panel
without air intake grille)
2. Connect the connectors for auto-swing motor
(Low Voltage 5pin, White).
Wrench
Louver
Enlarged View
Electrical Box
Connector for Auto Swing Motor
(Indoor Unit Side)
Without Air Inlet Grille
Connector for Auto Swing Motor
(Air Panel Side)