To Next PageTo Next Page
Need help?Do you have a question about the Hitachi RPI-2.5FSN5E and is the answer not in the manual?
General| Cooling Capacity (kW) | 2.5 |
|---|---|
| Cooling Capacity (W) | 2500 |
| Heating Capacity (kW) | 3.2 |
| Heating Capacity (W) | 3200 |
| Power Supply | 220-240V, 50Hz |
| Refrigerant | R410A |
| Indoor Unit Weight | 9 kg |
| Outdoor Unit Dimensions (WxHxD) | 780x540x269 mm |
General notes and disclaimers regarding publication content and errata.
Information on product identification and initial checks before installation.
Crucial safety information including symbols and warnings for installation and operation.
Detailed instructions for installing the indoor unit, including placement and mounting.
Procedures for connecting external air ducts and servicing the suction air filter.
How to modify the air inlet direction for different unit models.
Performance curves illustrating airflow and static pressure for various unit models.
How fan speeds correspond to external static pressure settings.
Procedures for setting the static pressure levels for optimal performance.
Specifications for the size of refrigerant and drain piping connections.
General guidelines for drain piping installation, including code compliance and material selection.
Detailed steps for connecting the drain pipe, including slope requirements and insulation.
Procedure for checking the drain system functionality using water and float switch.
Guide to connecting electrical wiring for the indoor unit, including box location and installation.
Diagram illustrating the layout of components within the electrical box.
Details on terminal board connections for remote control, transmission wires, and power supply.
Instructions for setting various dip switches for unit capacity, model, system number, and optional functions.
