To Next PageTo Next Page
Need help?Do you have a question about the Hitachi RPI-2.5FSN1E and is the answer not in the manual?
General| Cooling Capacity | 2.5 kW |
|---|---|
| Heating Capacity | 3.2 kW |
| Refrigerant | R410A |
| Weight (Indoor Unit) | 8 kg |
| Type | Split System |
| Power Supply | 220-240V, 50Hz |
| Noise Level (Outdoor) | 50 dB |
Safety notice regarding product disposal according to regulations.
Information on fluorinated greenhouse gases and mandatory labeling.
Lists DANGER, WARNING, CAUTION statements for safe operation.
Key operational notices and a summary of safety guidelines.
Details on high-pressure vessel safety and protection mechanisms.
Describes the components and functions of the air conditioner system.
Pre-operational checks and procedures before starting the unit.
Explains the functions and usage of the remote control unit.
Step-by-step guides for various operational modes like cooling, heating, etc.
Instructions for setting temperature, fan speed, and louvers.
Guides for timer, ventilation, and automatic cooling/heating operations.
Detailed procedures for adjusting the swing louvers.
Explains normal and abnormal condition indicators on the remote control.
Details on built-in automatic functions like frost prevention and restart.
Common issues, causes, and solutions for system problems.
Identification and labeling of unit components and their dimensions.
Diagrams and explanations of the refrigerant flow within the system.
Procedures for selecting and preparing piping materials.
Instructions for connecting refrigerant lines to the outdoor unit.
Guidelines for designing piping length based on unit specifications.
How to select piping sizes for different system configurations.
Procedures for charging refrigerant and handling related work.
Method for calculating extra refrigerant based on piping length.
General requirements and considerations for installing outdoor units.
Using fan performance data to select suitable ducts.
Instructions for setting up the drain system for the outdoor unit.
Initial checks and safety guidelines for electrical connections.
Specific wiring diagrams and DIP switch settings for outdoor units.
Indoor to outdoor unit wiring and selecting appropriate wire sizes.
Details on H-Link system wiring and dip switch configurations.
Instructions for installing the remote control switch.
Steps for performing operational tests after installation.
Details on safety devices and their settings for indoor and outdoor units.
List of error codes, their categories, and potential causes.
Detailed tables for diagnosing and resolving system problems.
