1
Product Features of new High Wall Indoor Unit
1. Product Features of new High Wall Indoor Unit
1.1 Stylish design with good sense of aesthetic.
● Simple and clear design of new panel for matching with any interior.
● LED temperature and operation mode display on front panel helps
improve user experience and sense of aesthetic, and user can see
the setting temperature easily.
1.2 Optimized cabinet and refrigerant distribution for low noise.
● Thanks to the active noise reducing technology, a max. 5dB noise is lowered
compare with the last generation.
● DC fan motor help realizes 6-step fan speed adjustment, more quiet and
ecient.
1.3 Compact design for ease of installation or
maintenance
● The unit has been designed with a at front panel and a slim
body. The front panel is easy to clean and should remain
relatively dust free.
● For 0.8 to1.3HP units, compact design unit with 815mm
width. For 1.5 to 1.8HP units, unit width is 915mm. For 2.0
to 2.5HP units, unit width is 1085mm. which can be installed
even at the narrow space among posts in the room. This
compact design allows for exible and neat installation or
maintenance work.
1.4 Convenient control with wireless/wired operation
● When each unit is controlled with the remote control switch,
wireless remote control operation is available by the built-in
receiver kit. Wired remote control operation is also available to
change instead of wireless operation.
● Signal receiving buzzer and indication lamp inform the wireless
remote control switch operation.
To Next Page
Loading...