--- 6 ---
8. DUST COLLECTION
8.1 Dust Collector
This is a system in which the housing is provided with a dust fan on its side so that air pressure from the dust fan
causes grinding dust to be drawn in from the inlet and collected in a dust bag.
8.2 To Maintain Dust Collecting Performance
When moist dust is drawn in, the dust collecting section becomes clogged and impairs dust-collecting
performance. Instruct the customer to operate the equipment in a dry location as much as possible.
A clogged dust bag impairs dust-collecting performance. Instruct the customer to frequently clean the dust
bag.
Overflow of dust in the dust bag impairs dust-collecting performance. Instruct the customer to empty the dust
bag when dust has been collected to about 70 % of bag capacity.
8.3 Others
Should sparks created from sanding smolder in the dust bag after sanding a steel plate etc., there is a risk of
burning. Instruct the customer to always remove sanding dust from the dust bag.
To Next Page
Loading...
