Hitachi SP 18VA User Manual

Model
Electronic Sander Polisher
Modèle
Polisseuse/lustruse électronique
Modelo
Lijadora pulidora electrónica
SP 18VA
DOUBLE INSULATION
DOUBLE ISOLATION
AISLAMIENTO DOBLE
INSTRUCTIONS DE SECURITE ET MODE D’EMPLOI
AVERTISSEMENT
Une utilisation INCORRECTE OU DANGEREUSE de cet outil motorisé peut entraîner la
mort ou de sérieuses blessures corporelles!
Ce mode d’emploi contient d’importantes informations à propos de la sécurité de ce produit.
Prière de lire et de comprendre ce mode d’emploi AVANT d’utiliser l’outil motorisé. Garder ce
mode d’emploi à la disponibilité des autres utilisateurs et propriétaires avant qu’ils utilisent
l’outil motorisé. Ce mode d’emploi doit être conservé dans un endroit sûr.
SAFETY INSTRUCTIONS AND INSTRUCTION MANUAL
WARNING
IMPROPER OR UNSAFE use of this power tool can result in death or serious bodily injury!
This manual contains important information about product safety. Please read and
understand this manual BEFORE operating the power tool. Please keep this manual
available for other users and owners before they use the power tool. This manual should be
stored in safe place.
INSTRUCCIONES DE SEGURIDAD Y MANUAL DE INSTRUCCIONES
ADVERTENCIA
¡La utilización INAPROPIADA O PELIGROSA de esta herramienta eléctrica puede resultar
en lesiones de gravedad o la muerte!
Este manual contiene información importante sobre la seguridad del producto. Lea y com-
prenda este manual ANTES de utilizar la herramienta eléctrica. Guarde este manual para
que puedan leerlo otras personas antes de utilizar la herramienta eléctrica. Este manual
debe ser guardado en un lugar seguro.
000BookSP18VA.indb1000BookSP18VA.indb1 2016/02/0311:52:252016/02/0311:52:25

Hitachi SP 18VA Specifications

General

Power	- W
Type of sander	-
Idle speed (max)	3400 RPM
Input power	1250 W
Output power	6800 W
Power source	AC

Weight and Dimensions

Depth	415 mm
Height	126 mm
Weight	2800 g
Sanding disc diameter	180 mm

Summary

SAFETY INSTRUCTIONS AND INFORMATION

Meanings of Signal Words

Defines signal words like WARNING and CAUTION used to indicate potential hazards.

General Power Tool Safety Warnings

Covers essential safety practices for general power tool operation.

Operation-Specific Safety Warnings

Details warnings for sanding, polishing, kickback, and specific rules.

Specific Safety Rules and Symbols

Details specific safety rules and explains common symbols used on the tool.

Double Insulation for Safer Operation

Explains the double insulation design for enhanced user safety.

FUNCTIONAL DESCRIPTION AND SPECIFICATIONS

Name of Parts

Identifies and labels the different components of the sander polisher.

Technical Specifications

Lists the technical specifications of the electronic sander polisher.

ASSEMBLY AND OPERATION

Applications and Pre-Operation Checks

Outlines uses, preparations, and checks required before operating the tool.

Operation and Accessory Mounting

Details operating procedures and how to attach bonnets/discs.

MAINTENANCE AND INSPECTION

Routine Checks and Repairs

Covers inspection of screws, brushes, and service procedures.

ACCESSORIES

Included and Optional Accessories

Lists standard and optional accessories available for the tool.