Hitachi SP 18VA - FUNCTIONAL DESCRIPTION AND SPECIFICATIONS; Name of Parts; Technical Specifications

English
8
FUNCTIONAL DESCRIPTION
SPECIFICATIONS
Motor Single-Phase Series Commutator Motor
Power Source Single-Phase 120V AC 60Hz
Current 11.0 A
No-Load Speed 0–3,400/min
Rated Speed 3,850/min
Sanding Disc Size:
external diam.
hole diam.
7" (180mm)
7/8" (22 mm)
Weight 6.2 lbs (2.8 kg)
NOTE
The information contained in this Instruction Manual is designed to assist you in the safe operation and maintenance
of the power tool.
NEVER operate, or attempt any maintenance on the tool unless you have first read and understood all safety
instructions contained in this manual.
Some illustrations in this Instruction Manual may show details or attachments that diff er from those on your own
power tool.
NAME OF PARTS
Brush Cap
Handle
Nameplate
Dial
Switch Trigger
Loop Handle
Backing Pad
Gear Cover
Lock Pin
Housing
000BookSP18VA.indb8000BookSP18VA.indb8 2016/02/0311:52:252016/02/0311:52:25