Hitachi SB10Y User Manual

HITACHI
Model
Modèle
Modelo
SB10Y
Belt/Disc Sander
Ponceuse à courroie/disque
Lijadora de Correa/Disco
INSTRUCTION MANUAL AND SAFETY INSTRUCTIONS
WARNING
Improper and unsafe use of this power tool can result in death or serious bodily injury!
This manual contains important information about product safety. Please read and understand
this manual before operating the power tool. Please keep this manual available for others
before they use the power tool.
Hitachi Koki
MANUEL D’INSTRUCTIONS ET CONSIGNES DE SÉCURITÉ
AVERTISSEMENT
L’utilisation inadéquate et non sécuritaire de cet outil électrique peut entraîner la mort ou des
blessures graves! Ce manuel contient des informations importantes sur la sécurité. Veuillez
lire et comprendre ce manuel avant d’utiliser l’outil électrique. Veuillez garder ce manuel
disponible pour les autres utilisateurs, avant qu’ils utilisent cet outil électrique.
MANUAL DE INSTRUCCIONES E INSTRUCCIONES DE SEGURIDAD
ADVERTENCIA
¡El uso inadecuado y no seguro de esta herramienta eléctrica puede ocasionar la muerte o
lesiones corporales graves! Este manual contiene información importante sobre la seguridad
del producto. Por favor lea y entienda este manual antes de usar la herramienta eléctrica.
Por favor mantenga disponible este manual para que otros puedan leerlo antes de usar la
herramienta eléctrica.

Hitachi SB10Y Specifications

General

Brand	Hitachi
Model	SB10Y
Category	Sander
Language	English

Summary

INSTRUCTION MANUAL AND SAFETY INSTRUCTIONS

WARNING

Improper and unsafe use can result in death or serious bodily injury. Read manual.

PRODUCT SPECIFICATIONS

WARNING

Use proper circuit protection for electrical hazards, fire hazards, or damage to the tool.

SAFETY

GENERAL SAFETY INSTRUCTIONS BEFORE USING THE SANDER

Combination of common sense, staying alert, and knowing how to use the sander safely.

ELECTRICAL REQUIREMENTS

POWER SUPPLY AND MOTOR SPECIFICATIONS

Details on voltage, amperage, and circuit requirements for safe operation.

GROUNDING INSTRUCTIONS

Tool must be grounded to protect operator from electrical shock. Use proper plug and receptacle.

GUIDELINES FOR EXTENSION CORDS

Use correct gauge extension cords to avoid voltage drop, power loss, and overheating.

ACCESSORIES AND ATTACHMENTS

RECOMMENDED ACCESSORIES

Use only accessories designed for this sander to avoid injury from broken parts or workpieces.

CARTON CONTENTS

UNPACKING AND CHECKING CONTENTS

List of parts included in the package for unpacking and checking.

UNPACKING YOUR SANDER

Visual guide to unpacking the sander and its components.

KNOW YOUR SANDER

ASSEMBLY AND ADJUSTMENTS

ATTACH TABLE

Instructions for attaching the table for use with the disc and belt.

MOUNT SANDER

Guidance on choosing a location and securely mounting the sander.

ATTACH ABRASIVE DISC

Steps for removing the cover and attaching the abrasive disc to the machine.

OPERATION

BASIC SANDER OPERATIONS

Instructions for turning the sander ON/OFF using the keyed switch.

ON/OFF Switch

Details on the keyed switch functionality for preventing unauthorized use.

ADJUSTING BELT TRACKING

How to adjust the belt tracking nut to center the belt on the drums.

ADJUSTING TABLE ANGLE

Steps to adjust the table angle and secure it for beveled work.

HORIZONTAL BELT SANDING WITH WORK STOP

Instructions for setting up the sander for horizontal belt sanding using the work stop.

ADJUSTING BELT ASSEMBLY POSITION

How to adjust the belt assembly from vertical to horizontal positions.

ABRASIVE BELT SANDING

Techniques for finishing flat surfaces, long pieces, curved edges, and end grain.

ABRASIVE DISC SANDING

Techniques for finishing small flat surfaces and convex edges using the abrasive disc.

USING MITER GAUGE

How to use the miter gauge for securing work and holding proper angles.

REPLACING ABRASIVE BELT

Steps for removing and installing a new abrasive belt onto the sander.

REPLACING ABRASIVE DISC

Procedures for removing and attaching a new abrasive disc to the machine.

MAINTENANCE

GENERAL MAINTENANCE

Safety precautions and general cleaning advice for the sander.

LUBRICATION

Information on lubrication needs for the tool's bearings and table.

CLEANING

How to clean the machine, drums, and dust collection bag for optimal performance.

KEEP TOOL IN REPAIR

Guidance on replacing worn parts like cords, abrasives, or damaged components.

TROUBLESHOOTING GUIDE

GENERAL

Lists common problems, their probable causes, and suggested remedies for the sander.

PARTS LIST

PARTS LIST FOR SCHEMATIC A

Detailed list of parts for Schematic A, including part numbers and descriptions.

PARTS LIST FOR SCHEMATIC B

Detailed list of parts for Schematic B, including part numbers and descriptions.