To Next PageTo Next Page
Need help?Do you have a question about the Hitachi SET FREE Series and is the answer not in the manual?
General| Refrigerant | R410A |
|---|---|
| Series | SET FREE |
| Operating Temperature Range (Cooling) | -5°C to 46°C |
| Noise Level (Indoor Unit) | 45 dB |
| Power Supply | 50/60Hz |
Notes regarding publication reproduction, changes, and errors.
Explains symbols used for danger, caution, and notes for safety.
Details the meaning and implications of safety symbols used in the manual.
Information about supplementary product data and manual reading importance.
Guidelines for safely moving outdoor units before installation.
Instructions for safe forklift use and crane lifting techniques for outdoor units.
Specifies unit weights and center of gravity dimensions for installation planning.
Identifies and lists components for the FSXNSE series outdoor units.
Identifies and lists components for the FSXNPE series outdoor units.
Specifies environmental and location requirements for outdoor unit placement.
Details minimum clearance dimensions around the outdoor unit for installation and service.
Provides instructions for unit installation based on surrounding walls and foundation requirements.
Lists required piping connection kits based on operating mode and unit capacity.
Specifies refrigerant pipe diameters for various system configurations.
Details pipe connection methods, installation precautions, and piping directions.
Covers refrigerant charging, vacuuming, leak testing, and safety measures.
Explains condensation drainage requirements and installation guidelines for outdoor units.
Describes the installation of the optional drainage kit DBS-TP10A.
Covers general electrical safety, wiring rules, and power supply considerations.
Specifies power supply requirements, cable sizes, and breaker settings for units.
Details the electrical connections and wiring methods for outdoor units and their components.
Explains the configuration of DIP switches on the PCB for various operational settings.
Lists essential checks before starting the system for installation and operation.
Provides step-by-step instructions for performing the system test run using the remote control.
Details the safety devices and their specifications that protect the compressor.
