To Next PageTo Next Page
Need help?Do you have a question about the Hitachi RPI-3.0FSN2SQ and is the answer not in the manual?
Definitions for hazard levels used with safety alert symbols.
Lists and illustrates the various parts of the indoor unit.
Lists essential tools and instruments required for unit installation.
Instructions for transporting the product to the installation location.
Safety precautions when handling the indoor unit to prevent damage or fire.
Lists accessories provided by the manufacturer for the indoor unit.
Performs initial checks and ensures proper clearance for installation.
Instructions for mounting the unit and adjusting its level.
Steps for connecting supply ducts and setting external static pressure.
Details on selecting and preparing copper pipes for refrigerant connections.
Instructions for connecting refrigerant pipes and proper tightening torques.
Guidelines for installing the drain pipe with correct slope and connections.
Procedure to check for smooth water flow and absence of leaks in the drain system.
Ensures proper selection and connection of electrical components and wiring.
Details on connecting remote control, power supply, and inter-unit wiring.
Specifies minimum wire sizes for power source based on standards.
Instructions for setting various dip switches for unit configuration.
Guidance on performing the test run according to the manual.
Details on settings for safety and control devices like thermostats and fuses.
General