Do you have a question about the Hitachi SMU300 and is the answer not in the manual?
Details SMU400 front panel items like hard disk carrier, release button, and USB ports.
Details SMU400 rear panel items like PSUs, LAN ports, and serial ports.
Explains SMU400 ETH1/ETH0 ports and their LED indicators.
Details SMU300 front panel items like DVD ROM and system LEDs.
Details SMU300 rear panel items like PSU, USB ports, and serial ports.
Explains SMU300 ETH0/ETH1 ports and their LED indicators.
Specifies serial port (COM1/COM2) connection parameters like baud rate and data bits.
Guides on configuring a laptop for serial connection using Putty and KVM.
Outlines procedures to obtain an SMU configuration backup via GUI, SSH, or USB.
Details steps for setting up a replacement SMU, including firmware installation.
Covers physical replacement and performing a sanity check on the new SMU.