Hitachi VM-E535LA User Manual

Details the technical specifications of the video camera/recorder.

Outlines the essential maintenance tasks required for the equipment.

Procedure to manually set the camcorder to the eject state.

Instructions for removing cases, circuit boards, and mechanism blocks.

Details how to connect equipment for performing circuit adjustments.

Step-by-step instructions for performing adjustments.

Procedure for adjusting the auto iris control.

Procedure for adjusting the matrix settings.

Procedure for adjusting the chroma gain.

Procedure for adjusting the autofocus system.

Procedure for adjusting the head switching point.

Troubleshooting for errors related to camera electric volume and digital adjustments.

Lists and explains various error messages encountered.

Troubleshooting steps for focus lens separation issues.

Troubleshooting steps when iris operation fails.

Lists mechanical parts with their symbols, part numbers, and descriptions.

Detailed schematic diagram for the Electronic Viewfinder (EMQ).

Table for identifying parts locations on various circuit boards.

Shows the overall block diagram of the system.

Details the display and application of self-diagnostic functions.

Explains the occasional defect self-diagnostic function in A mode.

Explains the mechanical block self-diagnostic function in B mode.

Procedures for disassembling the TH mechanism.

Procedure for phase matching during assembly.

Procedures for adjustments after replacing the cylinder.