To Next PageTo Next PageWhat to do if picture does not appear in the viewfinder of my Hitachi VM-E56A Camcorder?
If you're not seeing a picture in the viewfinder of your Hitachi Camcorder, make sure to remove the lens cap, slide the CAMERA/OFF/VIDEO switch to CAMERA, and disconnect the AV input cable from the camera/recorder.
Why won't my Hitachi VM-E56A record even when I press the start/stop button?
If your Hitachi Camcorder won't record, even when pressing the start/stop button, check the record-protect tab on the cassette. Also, ensure the cassette holder is properly closed by pushing the part embossed with 'PUSH'.
Why won't my Hitachi VM-E56A record when I press the Start/Stop button?
If your Hitachi Camcorder won't start recording, verify the record protect tab on the cassette. Ensure the CAMERA/OFF/VIDEO switch is set to CAMERA. Also, make sure the camera/recorder is properly connected to the TV or VCR.
What to do if picture is out of focus on my Hitachi Camcorder?
If the picture on your Hitachi Camcorder is out of focus, ensure that 'FOCUS' does not appear in the viewfinder. If it does, this indicates manual focus is enabled.
Why is there interference on playback picture of my Hitachi VM-E56A Camcorder?
To resolve interference on the playback picture from your Hitachi Camcorder, adjust the fine-tuning knob using the RF output on your television to get the best picture.
Why is the color on my Hitachi VM-E56A Camcorder TV screen too bright, faint, or changing?
If the color on your TV screen is too bright, faint, or changing when using your Hitachi Camcorder, and your TV has a VIR circuit, turn it off during playback.
How to fix auto-focus if it does not operate on my Hitachi Camcorder?
If the auto-focus on your Hitachi Camcorder isn't working, and you see an indicator in the viewfinder, press the FOCUS Control (AUTO/MAN) buttons to erase it. Also, auto-focus may not work if a special effects filter is attached or if you're recording specific objects.
What does it mean when TAPE appears in the viewfinder of my Hitachi Camcorder?
If 'TAPE' appears in the viewfinder of your Hitachi Camcorder, it could be due to abrupt temperature change. Try removing the cassette, setting the CAMERA/OFF/VIDEO switch to OFF, and waiting about an hour. If the problem persists, remove and reinsert the cassette several times or use a cleaning tape to clean the heads and replace the cassette.
What does the flashing indication in the electronic viewfinder of my Hitachi Camcorder mean?
If you see a flashing indication in the electronic viewfinder of your Hitachi Camcorder, try using a different battery or charging the current batteries.
Why does the picture bend at the top of the TV screen when using my Hitachi VM-E56A?
If the picture bends at the top of the TV screen when using your Hitachi Camcorder, it could be due to: 1. An older TV receiver that needs modification to work properly with the camera/recorder. 2. A damaged tape. Try using another cassette to see if the issue resolves.
General| Type | Camcorder |
|---|---|
| Recording Media | VHS-C |
| Video Format | VHS-C |
| Viewfinder Type | Electronic |
| Focus | Auto |
Instructions for setting up the video product safely and correctly.
Guidelines for operating the video product safely and avoiding hazards.
Precautions and conditions for servicing the video product.
Safety guidelines specific to the AC adapter and charger.
Step-by-step guide on how to charge the camcorder battery.
Instructions for inserting remote and camera batteries.
Step-by-step instructions for recording video.
Methods for playing back recorded tapes on a TV.
Common problems and their solutions for the camcorder.
