Advanced Techniques
pg. 37 - 50 -
50
RCA DISPLAY
Panasonic TITLE ON/OFF
Mitsubishi ZOOM.(T)
JVC COUNTER RESET
Sharp S.EDIT
Controlling the TV
Once programmed, the camera/recorder's remote control is ready to control the TV.
l
ll
l Press the button of the TV function that you want.
Be aware that not all of your TV's functions may work even though the remote control is correctly
programmed.
Note: It may not be possible to control all TVs listed in this Table.
Note: The AVX Button can't be used with Gold Star 2 and Sharp TVs.
Using Audio/Video Dubbing
Use audio/video dubbing to record audio and video from the camera/recorder's built-in
microphone and camera onto a previously recorded tape in the camera/recorder.
Audio/Video Dubbing Diagram
1. Connect your Camera/Recorder to the television, following "Playing Back Your Recording"
on page 27.
2. Turn on your television and place it in the camera/recorder input mode (consult your television
manual for details).
To Next Page
Loading...
Need help?
General
