Hitachi YUTAKI S RWM-5.0NE - 10. MAINTENANCE; 10.1 MAINTENANCE WORK; 10.1.1 General maintenance procedure for the outdoor unit

8.6.3.1 Controller Options
REF Access Description
Default
Value
Range Steps Units Application
Notes
Controller Options S SC S80 M
LCDUop Operation view Unit (*4)
Unit
Room
- - ○ ○ ○ ○ (*1)
ButtonAction Favourite Action Eco
Holiday
Eco / Comfort
Timer
DHW Boost
- - ○ ○ ○ ○ (*2)
tempOffset Temperature Sensor Offset 0 -5 to 5
1 ºC ○ ○ ○ ○ (*3)
? NOTE
• (*1): Available if Controller type (LCDM) has been selected as “Unit+Room”.
• (*2): Holiday only if Controller type (LCDM) has been selected as “Room”. To enable “DHW boost” option, the Status (DHWs) has to be set as
“Enabled”.
• (*3): if Controller type (LCDM)= “Room” or “Unit+Room”.
• (*4): The default value depends on LCDM (Controller type (LCDM))
LCDM (Controller type (LCDM): Controller type) LCDUop default value
Unit Unit
Room Room
Unit + Room Room
8.6.3.2 Room Names
PC-ARFHE controller allows the option to type the name of the different circuits
(Circuit 1 and Circuit 2).
When this description has been changed in this menu, the name is automatically
changed in anywhere it appears.
After changing the name, a brodcast message is sent to the rest of slave
devices so that they can be synchronised.
8.6.3.3 Date and Time
• Adjust Date and Time
• European Summer Time
• UTC Zone
UNIT CONTROLLER
PMML0335A rev.1 - 04/2016
162