Need help?Do you have a question about the Hitachi YUTAMPO Series and is the answer not in the manual?
General| Model | YUTAMPO Series |
|---|---|
| Power Consumption | Varies by model |
| Frequency | 50Hz |
| Safety Features | Overheat protection |
| Dimensions | Varies by model |
| Weight | Varies by model |
| Application | Space heating |
Explanation of buttons and indicators on the controller's interface.
Steps for initial setup, including filling the tank and powering on.
Instructions for adjusting the desired hot water temperature and related settings.
Schematic overview of the system's electrical and functional connections.
How to start/stop heating and understand status indicators.
Description of normal operation using only the heat pump.
Details on the operation and settings of the backup electrical heater.
Setup and operation of the weekly sterilization cycle for legionella prevention.
Manually forcing a one-time heating cycle for exceptional DHW demand.
Using the electrical heater for operation in case of outdoor unit malfunction.
Reducing compressor load to lower noise levels during night hours.
Setting up simple and schedule timers for automated heating operations.
Managing heat pump operation based on electricity availability.
Procedure for collecting refrigerant for part replacement.
Detailed electrical checks for various components of the outdoor unit.
Schematic and explanation of the outdoor unit's main power circuit.
Safe procedure to discharge capacitors and shut off power before checks.
Interpreting the LED indicators (LD301) for self-diagnosis.
Flowchart for diagnosing electrical faults in the outdoor unit.
Procedure for diagnosing issues related to the refrigerant cycle.
Diagnosing issues based on alarm codes reported by the tank unit.
Interpreting protection codes and diagnosing faults in the outdoor unit.
To Next Page