Operation—Operator’s Station
OUT1739,00001DB –19–05AUG02–1/1
Switch Panel
T147413B –UN–02NOV01
Side Entry Cab Switch Panel
T158065B –UN–30JUL02
Rear Entry Cab Switch Panel
1—Rear Work Light Switch
2—Accessory Power Port
3—Lighter
1. Rear Work Light Switch: When switch is ON, both
rear work lights come on.
2. Accessory Power Port: 12-volt 10-amp electrical port
provided for service and maintenance.
3. Lighter: For operator convenience. Can also be used
as a electrical port for service and maintenance for 24-volt
appliances.
OUT1739,00001DC –19–05AUG02–1/1
Pilot Control Shut-Off Lever
T148397 –UN–21NOV01
Lever In Locked Position—Side Entry Cab
1—Pilot Control Shut-Off Lever
The pilot control shut-off lever (1) shuts off hydraulic pilot
pressure to all pilot control valves. When pilot control
shut-off lever is in locked (Back) position, the machine will
not move if a lever or pedal is accidentally moved.
Always pull pilot control shut-off lever to locked position
when you stop the engine or leave the operator’s station.
Push pilot control shut-off lever forward to unlocked
position to operate machine.
2-1-7 081407
PN=41
To Next Page
