What to do if my HiTi Digital Printer is doing partial or incorrect printing?
If your HiTi Digital Printer is printing cards with partial or incorrect images, begin by verifying the printer settings. Then, check the interface cable and ribbon to ensure they are properly connected and in good condition. Also, make sure the printer’s cleaning roller and the printing card are clean. Finally, inspect the print head for any damage or debris.
Why is my HiTi Digital Printer printing horizontal white lines?
If your HiTi Digital Printer is printing cards with horizontal white lines, first, check that the ribbon is correctly fitted. If the problem persists, inspect the print head for dirt or damage.
What to do if my HiTi Digital CS-200e prints a blank card?
If your HiTi Digital Printer is printing blank cards, check the ribbon to ensure it's properly installed and not depleted. Next, verify the 'Printing Area' setting (value A) in the driver and set it to default. Finally, confirm that the card meets the CR-80 specification.
Why does my HiTi Digital CS-200e print some small blemishes?
If your HiTi Digital Printer is printing cards with small blemishes, the card surface may be dirty, so cleaning via dust arrestor may help. If the issue remains, the print head might be clogged. Also, check the roller of the dust arrester and replace it if needed.
How to troubleshoot a HiTi Digital Printer that is not responding?
If your HiTi Digital Printer isn't doing anything, start by checking the printer driver to ensure it is properly installed. Next, verify the printer's power supply and USB cable connections. Also, inspect the ribbon and card. Finally, try printing a demo chart to test the printer's functionality.
General| Print Resolution | 300 x 300 dpi |
|---|---|
| Connectivity | USB 2.0 |
| Type | Dye Sublimation |
| Print Technology | Dye Sublimation |
| Media Size | 4" x 6" |
| Media Type | Photo Paper |
| Weight | 3.5 kg |
| Power Consumption | 60W |
To Next Page
