HT-100P Series
HITROL CO., LTD. 7
Marking
User Training
Warranty
& Contact
■ Warranty & Service
This product is subject to a two-year shipment warranty. Unpaid service will be provided
for any damage found under normal operating conditions. If it does not refer to product
failure, payment will be required for the service charge.
You can request for A/S through our website or by contacting our headquarters.
■ Headquarters 〮 Factory 〮 Laboratory Contact Number
Address : HITROL CO.,LTD 141, Palhakgol-road, Jori-eup, Paju-si, Gyeonggi-do, Korea
TEL : 031-950-9700 (Headquarters and A/S)
FAX : 031-943-5600 (Headquarters and A/S)
■ Product Identification
The product identification mark is attached onto the shows the model name, serial
number, working temperature, working pressure, and matters regarding output. The
serial number is a unique manufacturing number for the identification of products.
Under the aforementioned, do not exceed 70°C, respectively, for the liquid in containers
when using the product. In addition, make sure that the ambient temperature of
housing is kept at -20 to +60°C.
Do not apply general products to hazardous areas.
To Next Page
Loading...
