Version 1.0, 12/2022. Copyright 2012 Hitron Technologies
41
Version 1.0, 12/2022. Copyright 2022 Hitron Technologies
41
Hitron CODA-57/57-EU User’s Guide
Problem: One of the LEDs does not Display as Expected
1 Ensure that you understand the LED’s normal behavior (see LEDs on page 13).
2 Ensure that the CODA-57/57-EU’s hardware is connected correctly; see the
Quick Installation Guide.
3 Disconnect and re-connect the power adaptor to the CODA-57/57-EU.
4 If none of the above steps solve the problem, consult your vendor.
Problem: I Cannot Access the CODA-57/57-EU or the Internet
1 Ensure that you are using the correct IP address for the CODA-57/57-EU.
2 Check your network’s hardware connections, and that the CODA-57/57-EU’s
LEDs display correctly (see LEDs on page 13).
3 Make sure that your computer is on the same subnet as the CODA-57/57-EU;
see IP Address Setup on page 15.
4 If the above steps do not work, you need to reset the CODA-57/57-EU. See
Resetting the CODA-57/57-EU on page 18. All user-configured data is lost, and
the CODA-57/57-EU is returned to its default settings.
5 If the problem persists, contact your vendor.
To Next Page
