HEV-1000 User Manual
- Log file storage format
[2017/10/12 14:49:48] 25.9KV 17023
[2017/10/12 14:49:49] 16.8KV 24305
[2017/10/12 14:49:50] 17.9KV 63230
[2017/10/12 14:49:51] 144.1KV 207878
3) Cautions for recording
• Manual recording will be continued although ESD is occurred. Here, the event recording file
and its log file will not be created.
• Recording of video can be only made on the Main screen. However, it cannot be made in the
following circumstances:
- When any of the following setting is changed on the Main screen:
VIDEO SELECT, UV PHOTON COLOR, GAIN ADJUST, UV OVERLAY POSITION,
TRIGGER THRESHOLD, DETECT LEVEL
- In the Album Mode,
- In the Setting Mode,
- When linked with “HEV-1000 Intranet search and settings” program; and,
- When the storage device is problematic (no storage device or the file system that is not
supported, etc.).
• Error will occur when separating a storage device (USB or SD Card) from the device during
recording.
You may lose your recording if you separate the storage device without pressing “Stop”
button to finish your recording. This also can lead to fatal error or damage to your storage
device (USB or SD card). Must finish your recording or turn off the power of HEV-1000 before
you remove the storage device.
(Caution) If any error occurs in HEV-100 due to separation of storage device without finishing
recording, your next recording may not be made normally as well. In such case, turn off the
power of HEV-1000 and turn it on again.
To Next Page
Loading...
Need help?
General