Hive HEV-1000 User Manual

HEV-1000 User Manual
Rear
On the rear side of HEV-1000, there are the power terminal, the LCB connecting terminal, the
HDMI terminal, the LAN terminal, the USB slot and SD Card slot where users can save their
recordings.
7
Power terminal
Connect the power adaptor enclosed. You can apply/stop applying the power to the device.
8
SD Card slot
Slot to connect the SD Card to save your recordings.
Taking out the SD card during the device’s operation may result in data loss.
Before taking out the SD card, make sure you turned off the device power first.
9
HDMI terminal
Connect the HDMI cable.
10
LCD Touch Screen Connecting Terminal
This terminal is to connect the LCD touch screen that is sold separately by using the Micro
HDMI cable enclosed with the LCD touch screen.
11
LAN terminal
This terminal is to be used when transmitting any video file (FTP) through the network.
12
USB terminal ( Micro C Type )
You can connect a USB device to save your recordings.

Hive HEV-1000 Specifications

General

Brand	Hive
Model	HEV-1000
Category	Measuring Instruments
Language	English