HJC Smart HJC 20B User Manual

9
English
SMART HJC 20B
2.2.1 Preparing the helmet for installation
1. Loosen the two short screws on the cover of the helmet with the
included allen wrench.
2
1
2. Detach the snap fasteners of the cheek pad and remove the
cheek pad from the helmet.
2.2.2 Installing the headset
1. Align the arrows on the microphone cable and insert the
microphone cable into the microphone connector.
2. Tighten the two long screws until the Bluetooth module is fastened
rmlytothehelmet.
1
2
3

HJC Smart HJC 20B Specifications

General

Brand	HJC
Model	Smart HJC 20B
Category	Motorcycle Accessories
Language	English