To Next Page

To Previous Page

PVR Operation (Personal Video Recorder)

PVR/Timeshift

Select PVR/TIMESHIFT with the  buttons. Press

EXIT

or  to enter the sub

menu PVR/TIMESHIFT.

Press the numeric keys and  in this menu. You can set channel, date, start

time, mode, type and recording length.

Note:

You will need to check rst your inserted USB storage device if the recording

speed is sufcient and if the format is right. Otherwise, the task will fail.

The U disk may be formatted when recorded, please do not store important

les in the U disk.

When approaching the preset time, a countdown will appear to remind you of

the user menu.

When you open the Edit Timer menu, you can set the recording task you want

to record. If you have successfully set the recording task, the TV automatically

turns on in standby mode one minute before the task starts. When the

recording task starts, it will automatically record.

If the TV enters the wrong standby mode when starting the task, you can

press the POWER button to watch the TV program. You can perform the same

operation as Direct Record. If you press POWER again, the TV will turn off and

continue to record. The TV really turns off until the recording task is completed.

If you press the REC.TASK button, you can also enter the timer menu.

HKC 17H2C User Manual

Questions and Answers: