HMS Anybus Modbus-TCP/RTU Gateway User Manual

+$/067$'&+,&$*2.$5/658+(72.<2%(,-,1*0,/$1208/+286(&29(175<381(&23(1+$*(1
HMS Industrial Networks
Mailing address: Box 4126, 300 04 Halmstad, Sweden
Visiting address: Stationsgatan 37, Halmstad, Sweden
Connecting Devices
TM
E-mail: info@hms-networks.com
Web: www.anybus.com
User Manual
Anybus® Modbus-TCP/RTU Gateway
AB7702
Doc.Id. HMSI-168-77
Rev. 2.03

HMS Anybus Modbus-TCP/RTU Gateway Specifications

General

Product Type	Gateway
Protocols Supported	Modbus TCP, Modbus RTU
Power Supply	24 VDC
Mounting	DIN rail
Serial Ports	1 x RS-232/422/485
Weight	150 g
Operating Temperature	-25 to +70°C
Communication Ports	Ethernet, Serial
Ethernet Ports	1
Certifications	CE, UL
Model	Anybus Modbus-TCP/RTU Gateway

Summary

Preface

About This Document

Explains the purpose and scope of the user manual.

How To Use This Document

Provides guidance on how to effectively use the document.

Important User Information

Contains critical notes, warnings, and disclaimers for user safety and product use.

Document History

Revision List

Details the revisions made to the document over time.

Conventions & Terminology

Sales and Support

Chapter 1 About the Anybus Modbus TCP/RTU Gateway

General Information

Provides an overview of the Anybus Modbus TCP/RTU Gateway's functionality and connectivity.

Mounting

Instructions on how to install the Anybus module on a DIN-rail and connect cables.

Connectors

Details the pinout and function of the RS-232 DSUB, RS-485 screw terminal, and Ethernet connectors.

Digital Inputs and Indicators

Describes digital inputs and the functionality of status, serial link, and activity LEDs.

Chapter 2 Configuration

Configure the IP Address

Guides on using the Anybus IPConfig utility to set TCP/IP network settings.

Changing IP Settings

Details how to modify the IP address, subnet mask, gateway, DNS, and hostname.

Configure the Gateway

Steps to log in to the gateway's web interface for further configuration.

Network Settings

Describes how to view and change TCP/IP settings via the web interface.

Modbus Configuration

Details settings for Modbus RTU/ASCII transmission, physical interface, and Modbus TCP parameters.

Internal Registers

Lists and describes internal registers used for monitoring and configuration of the gateway.

Password Settings

Instructions on how to change the administrator password for the gateway.

Status

Provides information on network connections, responses, errors, and exceptions displayed on the web interface.

Appendix A Specifications

Ethernet Connection

Specifies the Ethernet connection type and connector used by the gateway.

Serial Interfaces

Details the EIA-232 and EIA-485 serial interface specifications and connectors.

Power Supply

Outlines the voltage and current requirements for powering the Anybus module.

Environmental Specification

Lists the operating and storage temperature ranges, and humidity limits.

Cover Material

Describes the material used for the gateway's casing and its fire safety rating.

Mounting Option

Specifies the mounting method for the gateway, typically DIN rail.

Certifications

Lists the CE and UL/cUL certifications obtained by the module.