Need help?Do you have a question about the HMS Ixxat CAN@net NT 420 and is the answer not in the manual?
General| Number of CAN channels | 2 |
|---|---|
| CAN FD support | Yes |
| Protocols | TCP/IP, UDP |
| Operating temperature | -20°C to +60°C |
| Galvanic isolation | Yes |
| CAN Bit Rates | 10 kBit/s ... 1 Mbit/s |
Guidelines for product protection from environmental factors and modification.
Lists hardware capabilities, connectivity, and configuration options.
Steps for installing VCI driver and CAN-Gateway Configurator.
Guidance on connecting cables and connectors to the device.
Procedures for verifying and updating device firmware.
Prerequisites, initial settings, and device scanning for configuration.
Steps to configure the device for ASCII Gateway mode.
Steps to configure the device for CAN-Ethernet-CAN Bridge modes.
Steps to configure the device for VCI Interface mode via Ethernet.
To Next Page
