Need help?Do you have a question about the HMS Anybus X-gateway AB7800 and is the answer not in the manual?
General| Model | AB7800 |
|---|---|
| Type | X-gateway |
| Category | Gateway |
| Communication Protocols | PROFIBUS, Ethernet |
| Protocol Conversion | Yes |
| Power Supply | 24 VDC |
| Weight | 500 g |
| Mounting | DIN rail |
| PROFIBUS Baud Rate | 9.6 kbit/s to 12 Mbit/s |
| Ethernet | 10/100 Mbit/s |
| Relative Humidity | 5% to 95% (non-condensing) |
| Certifications | CE, UL |
| Storage Temperature | -40 to 85 °C |
Describes the functions and general configuration of the Anybus X-gateway.
Lists the version history, dates, and descriptions of document updates.
Explains conventions used for lists, typeface, cross-references, and icons.
Details specific conventions used, such as hexadecimal notation and byte order.
Introduces the Anybus X-gateway's architecture and configuration methods.
Explains how data is exchanged between network interfaces, including I/O and parameter data.
Details runtime status and diagnostic information provided by the Status Word.
Provides active status of slaves connected to a master interface.
Mentions additional registers or status lists provided by specific network interfaces.
Explains how to control gateway functions using the Control Word.
Describes how the gateway handles network failures, such as freezing or clearing data.
Illustrates typical data mapping configurations for slave-to-slave and master-to-slave gateways.
Details procedures for mounting and removing the unit on a standard DIN rail.
Describes the power connector, USB connector, and general LED indicators.
Introduces the Anybus Configuration Manager software for gateway setup and configuration.
Guides on downloading, installing, and connecting the Anybus Configuration Manager.
Explains how to retrieve, view, and modify gateway configurations using the software.
Lists detailed technical specifications including dimensions, operating conditions, and certifications.
Details EMC compliance standards and directives for industrial environments.
Provides instructions for proper disposal and recycling of the product.
Outlines ATEX certification details and requirements for explosive atmospheres.
Details UL certification, suitability for hazardous locations, and critical usage warnings.
To Next Page
