Need help?Do you have a question about the Hobart Welding Products BETA-MIG 1800 and is the answer not in the manual?
General| Amperage Range | 30 - 180 A |
|---|---|
| Wire Feed Speed Range | 50 - 700 IPM |
| Input Power | 230 V, 60 Hz |
| Rated Output | 130 A @ 30 % Duty Cycle |
| Duty Cycle | 30% at 130 A |
| Wire Size Range | 0.023 - 0.045 inches |
| Weight | 68 lbs (30.8 kg) |
Details potential hazards associated with arc welding processes.
Covers safety symbols and standards for equipment installation and operation.
Discusses electromagnetic fields (EMF) and their potential effects and mitigation.
Overview of machine specs, duty cycle, and performance curves.
Guides for connecting welding gun, gas supply, and setting polarity.
Instructions for electrical service, input power, and threading welding wire.
Description of control panel functions and recommended welding parameter guide.
Outlines regular maintenance tasks for the welding unit.
Provides remedies for welding and wire drive problems.
Presents the electrical schematic for the welding power source.
Lists components and part numbers for the main assembly of the welder.
Lists components and part numbers for the M-15 welding gun assembly.
Outlines the terms and conditions of the 5/3/1 limited warranty for Hobart products.
To Next Page
