What to do if the electrode is freezing to the work with my Hobart Welding Products STICKMATE LX?
If the electrode is freezing to the work when using the Hobart Welding Products Welding System, try increasing the amperage setting. Also, consider increasing the arc length. Finally, ensure you are using dry, properly stored electrodes.
How to fix a Hobart Welding Products STICKMATE LX Welding System with no weld output and the fan not running?
If the Hobart Welding Products Welding System has no weld output and the fan isn't running, ensure the line disconnect switch is in the On position. Also, check the line fuses and replace them if they are open. Reset the breakers if necessary.
How to stop noise and vibration from the shunt block in Hobart Welding Products Welding System?
To address noise and vibration from the shunt block in your Hobart Welding Products Welding System, lubricate the shunt block and/or tighten the adjustment screws.
What to do if the fan does not run, but weld output is okay in Hobart Welding Products STICKMATE LX Welding System?
If the fan is not running but the weld output is okay on your Hobart Welding Products Welding System, first ensure that nothing is blocking the movement of the fan. If the fan still doesn't run freely, replace the fan motor.
How to troubleshoot erratic weld current in a Hobart Welding Products STICKMATE LX?
If you are experiencing erratic weld current with your Hobart Welding Products Welding System, try cleaning and tightening all weld cable connections.
General| Brand | Hobart Welding Products |
|---|---|
| Model | STICKMATE LX |
| Category | Welding System |
| Language | English |
Explains warning symbols and their meanings for safety.
Details potential dangers associated with arc welding processes.
Covers hazards like fire, explosion, gas buildup, hot parts, noise, and cylinder safety.
Explains additional symbols for installation, operation, and maintenance safety.
Provides warnings regarding chemicals known to cause birth defects or cancer.
Lists key safety standards and their sources.
Discusses electromagnetic fields and potential interference.
Explains symbols used in the manual and their meanings.
Describes the information found on the equipment's rating labels.
Details technical specifications for AC/DC and AC models.
Provides charts illustrating duty cycle capabilities for different models.
Shows volt-ampere curves for AC/DC and AC models.
Guidance on choosing a suitable installation location for the unit.
Step-by-step instructions for installing the electrode holder and work clamp.
Provides guidance on electrical service requirements and connections.
Instructions for safely connecting the unit to the input power source.
Details the controls and their functions for AC/DC operation.
Details the controls and their functions for AC-only operation.
Outlines the schedule and tasks for routine maintenance of the unit.
Instructions for lubricating shunt blocks and adjusting for noise.
Steps for reinstalling the amperage adjustment indicator mechanism.
Provides a guide to identify and resolve common operational problems.
Shows the electrical circuit diagram for AC/DC models.
Shows the electrical circuit diagram for AC-only models.
Step-by-step procedure for Shielded Metal Arc Welding.
Guide for selecting appropriate electrodes and amperage settings.
Techniques for correctly striking a welding arc.
Guidance on proper electrode holder angle for different welds.
Describes characteristics of good and poor weld beads.
Factors influencing weld bead shape like angle, arc length, and speed.
Techniques for electrode movement during welding processes.
Welding procedures and considerations for butt joints.
Welding procedures and considerations for lap joints.
Welding procedures and considerations for tee joints.
Identifies common welding defects and their corrective actions.
Illustrates the main assembly and components of the AC/DC model.
Lists and describes individual parts and hardware for the main assembly.
Outlines the warranty coverage periods for parts and labor.
Lists items and conditions not covered by the warranty.
Section for recording personal and purchase details of the equipment.
Information on where to find distributors, technical assistance, and manuals.
To Next Page
