HobbyKing Gee Bee R3 User Manual

1
Gee Bee R3
95% Almost-ready-to-fly, and easy to fly
Instruction Manual
Congratulations on your purchase of this excellent almost-ready-to-fly
R/C model! Our airplane has been designed by expert engineers and built
by skilled craftsmen. Many of the parts have been factory-assembled and
installed for you, yet your ultimate success or failure depends on you. Be
sure you have read and understand the entire manual before attempting to
assemble, set up and fly the model.
WARNING －
－－
－ THIS IS NOT A TOY!
Radio controlled model aircraft are capable of inflicting serious injury
and /or property damage if not assembled, operated and maintained in a
competent and safe manner. The successful assembly, operation and

HobbyKing Gee Bee R3 Specifications

General

Brand	HobbyKing
Model	Gee Bee R3
Category	Toy
Language	English

Summary

Instruction Manual Overview

Important Safety Warning

Radio controlled model aircraft can cause serious injury or property damage if not assembled or operated safely. This is not a toy.

Assembly Instructions

Step 1: Wing Assembly

Step 2: Landing Gear Installation

Step 3: Tail Surface Assembly

Step 3 (Cont.): Rudder, Elevator Pushrods, and Servos

Step 4: Engine Installation

Covers fitting the engine cowl, mounting the engine, connecting the throttle pushrod, and securing the fuel tank.

Step 5: Receiver and Battery Mounting

Details on placing the battery, connecting the ESC, installing control cables, and mounting the engine cowl.

Step 6: Wing Mounting to Fuselage

Instructions for joining the wing halves using the carbon fiber dowel and aluminum wing tube.

Step 6 (Cont.): Final Wing Attachment and Canopy

Step 7: Final Check Before Flying

Covers final checks including alignment, CG point, control surface travel, and radio/engine tests.

Control Surface Travel Settings

Pre-Flight Radio and Engine Checks

Essential checks for transmitter, receiver, servos, and engine operation before the first flight.