EasyManua.ls Logo

HobbyKing HUMMER EPP-3D User Manual

HobbyKing HUMMER EPP-3D
5 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Before use, please read the explanations carefully!
HUMMER EPP- 3D
Instruction Manual
Specifications
Fuselage: Length 950mm
Wingspan: 1000mm
Flying Weight: 450 - 500g (with battery)
Additional Required Equipment (not included in the kit
Motor: 2212 1000KVor2213 1000KV
ESC: 20A
Propeller: 1047 Slow Flyer Prop
Servo: 4 * 9G
Radio::4/more channels 4
Battery: 11.1V 850-1300mAh li-po
SAFETY PRECAUTIONS
1. We recommend that you get the assistance of an experienced pilot during the
assembling
process.
2. The kit contains small parts. So keep out of children's reach when assembling.
3. The flying weight of the plane is about 400g. In order to ensure the flight performance,
use the motor and battery with suitable weight.
Question and Answer IconNeed help?

Do you have a question about the HobbyKing HUMMER EPP-3D and is the answer not in the manual?

HobbyKing HUMMER EPP-3D Specifications

General IconGeneral
BrandHobbyKing
ModelHUMMER EPP-3D
CategoryToy
LanguageEnglish

Summary

Product Specifications and Safety

Aircraft Specifications

Details the physical dimensions, weight, and required components for the aircraft.

Safety Precautions

Advises on seeking assistance from experienced pilots and keeping small parts away from children.

Parts List and Assembly Instructions

Aircraft Parts Inventory

Lists all components included in the kit for aircraft assembly.

Wing Assembly and Reinforcement

Instructions for assembling the main wings and reinforcing them with carbon rods.

Fuselage and Landing Gear Setup

Details on attaching fuselage stiffeners, wings, and landing gear components.

Tail Assembly and Control Surface Prep

Guidance on assembling the horizontal tail and preparing control surfaces with hinges.

Servo and Motor Mount Installation

Instructions for installing servos, connecting rods, and preparing the motor mount.

Final Assembly and Component Attachment

Steps for completing fuselage assembly, attaching the landing gear, and mounting the motor.

Flight Tuning and Center of Gravity

Guidance on setting the center of gravity and adjusting flight control trims for optimal performance.

Flight Operation and Assistance

General and 3D Flight Control Settings

Recommended control surface throws for general and 3D flight modes.

Seeking Expert Assistance

Advice for beginners to seek help from experienced pilots for initial flights.

Related product manuals