EasyManuals Logo

Hobie Mirage Compass Instructions

Hobie Mirage Compass
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #7 background imageLoading...
Page #7 background image
7
hobie.com
Seating
4
Make sure the seat clips are
attached to the boat... NOT the
retention loops on the seat itself.
Clip the two back straps to the pad
eye loops on each side of the cock-
pit. Adjust the strap lengths so that
the seat is in a comfortable upright
position.
Using the Seat Outside the Boat
2
Clip the two seat back straps to
the seat retention loops on the
sides of the seat frame. Adjust the
strap length so that the seat is in
a comfortable upright position.
1
Unclip the seat back hooks and frame
Bungees to detach the seat from the
boat.

Other manuals for Hobie Mirage Compass

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Hobie Mirage Compass and is the answer not in the manual?

Hobie Mirage Compass Specifications

General IconGeneral
Fitted Hull Weight68 lbs / 31 kg
Capacity400 lbs / 181 kg
Hull ConstructionRotomolded Polyethylene
SeatVantage CT
Length12 ft / 3.66 m
Width34 in / 0.86 m
StorageFront Hatch, Rear Cargo Area
Vantage Seat Capacity275 lbs / 125 kg

Related product manuals