Hobot 268 - Getting to Know the Device

- 5 - HOBOT Technology Inc.
Getting to know the device
Step 1. Preparing
(1) Do not use device on rainy or humid days.
(2) For windows with no balcony, a warning area must be established on the
ground below to prevent people from coming near it.
(3) Check to see if the safety rope is broken or if the knot is loose.
(4) Fasten the safety rope and tie to an indoor fixture before operating if
clean outside of higher floor window.
Safety rope & buckle
DC power jack
Vent
Green light: full-charged
Hanging hole
Power-switch
Caution sticker
Blue light: Indicates
normal status
Red light: Indicates
abnormal status
Orange light: charging
Vent
Handle
Buzzer
Remote receiving window
2-Laser Sensor
Cleaning cloth
Blue LED, Red LED
Remote receiving window
2-Caterpillar wheel
Suction area